adminLearn how to easily replace your key fob battery with our step-by-step guide. Identify, open, remove, replace, and close your key fob case. Keep your fob working smoothly.Are you having trouble with your Subaru key fob? One common issue that many Subaru owners face is a dead battery in their key fob. But fear not, replacing the battery in your Subaru key fob is a relatively simple task that you can easily do at home. In this blog post, we will guide you through the process of changing the battery in your Subaru key fob, step by step. We will cover everything from identifying the correct battery type for your key fob to opening the case, removing the old battery, and inserting a new one. By the end of this post, you will feel confident and empowered to tackle this simple maintenance task on your own. So, grab your key fob and let’s get started!
Identifying the Battery Type
When it comes to changing the battery in your Subaru key fob, the first step is to identify the type of battery that your key fob uses. This can usually be found in the owner’s manual for your vehicle. If you don’t have the manual handy, you can also remove the battery from the key fob and check the model number to determine the type.
Once you have identified the type of battery, you can then purchase a replacement. Most Subaru key fobs use a CR2032 3V battery, but it’s always best to double-check before making a purchase. You can usually find replacement batteries at your local automotive store or online.
It’s important to note that different Subaru key fob models may use different types of batteries, so it’s crucial to verify the correct battery type for your specific key fob. Using the wrong type of battery can cause damage to your key fob and may result in it not functioning properly.
Opening the Key Fob Case
Before you can change the battery in your Subaru key fob, you will need to open the key fob case. This can be done by inserting a small flathead screwdriver into the seam of the key fob and gently prying it open. Be careful not to apply too much pressure, as you don’t want to damage the case.
Once you have successfully opened the key fob case, you will be able to access the old battery. It’s important to take note of the orientation of the old battery before removing it, so that you can insert the new battery correctly.
After opening the key fob case and removing the old battery, you will be one step closer to having a fully functioning key fob once again. The next step will be to insert the new battery, so that you can continue using your Subaru key fob with ease and convenience.
Removing the Old Battery
When it comes to removing the old battery from your Subaru key fob, the first step is to look for the small indentation on the side of the key fob. This indentation is where you will insert a flathead screwdriver or a coin to pry open the case.
Once you have pried open the case, you will see the old battery inside. Carefully remove the old battery, taking note of the direction in which it is inserted. It’s important to pay attention to the orientation of the old battery so that you can insert the new battery correctly.
After you have successfully removed the old battery, you can then dispose of it properly and prepare to insert the new battery into the key fob.
Inserting the New Battery
Once you have removed the old battery from your Subaru key fob, it’s time to insert the new one. Make sure to check the battery type before purchasing a replacement. Most Subaru key fobs use a CR2032 battery, but it’s always best to double-check. Once you have the correct battery, take it out of its packaging and hold it with the positive (+) side facing down.
Next, carefully place the battery into the slot, ensuring that the positive side is aligned with the positive indicator in the key fob. Once the new battery is properly positioned, apply gentle pressure to secure it in place. Be sure to handle the battery carefully to avoid damaging it or causing injury.
Once the new battery is inserted, you can reassemble the key fob by following the steps in the Closing the Key Fob Case section.
Closing the Key Fob Case
After successfully inserting the new battery into your Subaru key fob, the next step is to close the key fob case. This may seem like a simple task, but it’s important to ensure that the case is properly closed to avoid any issues with the key fob functioning correctly.
First, make sure that the battery is securely in place and that there are no loose components inside the key fob. Once you have confirmed this, carefully line up the two halves of the key fob case, ensuring that they fit together perfectly. Take your time with this step to avoid any potential damage to the key fob or the case itself.
Once the two halves are aligned, carefully press them together until you hear a click. This click signifies that the key fob case is securely closed and that the two halves are properly aligned. Finally, give the key fob a quick once-over to make sure that everything is in place and that the case is securely closed. Your Subaru key fob should now be ready to use with its new battery.
Frequently Asked Questions
How do I know if my Subaru key fob battery needs to be changed?
You may notice that your key fob is not working as effectively, such as having to press the buttons multiple times to unlock your car, as a sign that the battery needs to be changed.
What type of battery does a Subaru key fob use?
Most Subaru key fobs use a CR1632 battery, but it’s best to check the owner’s manual for your specific model.
How do I open a Subaru key fob to change the battery?
You can usually use a small flathead screwdriver to gently pry open the key fob, being careful not to damage the casing. Then, you can easily access the battery.
Where can I purchase a replacement battery for my Subaru key fob?
You can purchase a replacement CR1632 battery at most hardware stores, electronics stores, or online retailers.
How do I properly dispose of the old key fob battery?
You should dispose of the old battery at a designated recycling center or a store that recycles batteries to ensure proper and safe disposal.
After changing the battery, my Subaru key fob still doesn’t work. What should I do?
If your key fob still doesn’t work after changing the battery, you may need to reprogram the key fob or have it inspected by a professional.
Can I change the battery in my Subaru key fob myself, or should I have a professional do it?
Changing the battery in a Subaru key fob is usually a simple process that you can do yourself, but if you’re unsure, it’s always best to consult a professional.
Add comment