Learn how to identify, open, replace, test, and reassemble your key fob battery with our comprehensive guide. Never get locked out again!Are you having trouble with your Subaru key fob? Is it not working as it should, or simply not responding? One of the most common issues with key fobs is a dying or dead battery. Fortunately, replacing the battery in a Subaru key fob is a relatively simple process that you can do at home with just a few basic tools. In this blog post, we will guide you through the step-by-step process of changing the battery in your Subaru key fob. From identifying the correct battery type to testing the key fob after replacing the battery, we will cover everything you need to know to get your key fob working like new again. So, if you’re tired of struggling with a non-responsive key fob, read on to learn how to easily and quickly change the battery and get your Subaru key fob back in working order.
Identifying the Battery Type
When it comes to replacing the battery in your Subaru key fob, the first step is to identify the type of battery you need. Most Subaru key fobs use either a CR1620 or a CR1632 battery, but it’s important to double check the specific model of your key fob to ensure you get the right battery. You can find this information in your owner’s manual, or you can simply open up the key fob and look at the existing battery to see what type it is.
If you’re unsure of the battery type, it’s always a good idea to consult with a professional at your local Subaru dealership or an automotive parts store to ensure you get the correct replacement battery for your key fob. Using the wrong type of battery can cause damage to your key fob and result in it not functioning properly, so accuracy in identifying the correct battery type is crucial.
Once you have identified the correct battery type for your Subaru key fob, you can proceed with the next steps in the battery replacement process, ensuring a smooth and successful outcome.
Opening the Key Fob
When it comes to changing the battery in a Subaru key fob, the first step is to open the key fob to access the battery compartment. To do this, you will need a small flathead screwdriver or a plastic pry tool. Look for the small seam along the edge of the key fob where the two halves meet. Carefully insert the screwdriver or pry tool into this seam and gently twist to pop the key fob open. Be sure to work slowly and carefully to avoid damaging the key fob casing.
Once you have the key fob open, you will need to locate the battery compartment. In most Subaru key fobs, the battery compartment is located on the inner side of the key fob’s circuit board. Use caution when removing the circuit board to avoid damaging any of the internal components. Once the circuit board is removed, you should see the battery compartment, typically secured with a small screw.
After removing the screw, you can carefully open the battery compartment to access the old battery. Take note of the orientation of the old battery before removing it to ensure that the new battery is installed correctly. With the old battery removed, you can proceed to the next step of replacing the battery in your Subaru key fob.
Replacing the Battery
Replacing the Battery
When it comes to replacing the battery in your Subaru key fob, it’s important to identify the type of battery that your key fob uses. The most common type of battery used in Subaru key fobs is a CR2032 battery. To open the key fob, you will need a small flathead screwdriver to pry open the case. Carefully insert the screwdriver into the notch on the side of the key fob and gently twist to separate the two halves of the case.
Once the key fob is open, you will need to locate the battery compartment. The battery compartment is typically located on one side of the key fob and is held in place by a small metal clip. Use the screwdriver to carefully lift the clip and remove the old battery from the compartment. Be sure to take note of the orientation of the battery before removing it so that you can properly insert the new battery.
After removing the old battery, you can then insert the new CR2032 battery into the compartment. Make sure the battery is securely in place and that the metal clip is holding it in place. Once the new battery is installed, you can then reassemble the key fob by snapping the two halves of the case back together. Test the key fob to ensure that the new battery is working properly by pressing the buttons to lock and unlock your Subaru’s doors.
Testing the Key Fob
After replacing the battery in your Subaru key fob, it’s important to test the key fob to ensure that it is working properly. One way to test the key fob is by simply pressing the buttons to see if the car responds. If the car locks and unlocks as it should, then the key fob is working properly. Another way to test the key fob is by using a key fob tester or a diagnostic tool. These tools can determine if the key fob is sending out the proper signals to the car.
If the key fob does not seem to be working, it may be a sign that the battery was not replaced correctly or that there is another issue with the key fob. In this case, it may be necessary to open the key fob again and double check the battery placement. If the problem persists, it may be best to consult with a professional or contact the car manufacturer for further assistance.
In conclusion, testing the key fob is an important step after replacing the battery. By following these steps, you can ensure that your Subaru key fob is in good working condition and that you can continue to use it to lock and unlock your car with ease.
Reassembling the Key Fob
Now that you have successfully replaced the battery in your Subaru key fob, it’s time to reassemble the device. First, ensure that the key fob circuit board is properly placed inside the key fob shell. You can do this by aligning the buttons on the circuit board with the corresponding buttons on the shell. Once the circuit board is in place, carefully position the key ring loop on the shell and press it firmly to snap it back into place.
Next, insert the metal key back into its slot in the key fob shell, making sure it is secure. Once the key is in place, align the back cover with the front shell of the key fob and press firmly to snap it back together. Be sure to listen for the clicking sound that indicates the key fob is securely closed.
Finally, test the key fob to ensure that all the buttons are functioning properly and that the battery replacement was successful. If everything is in working order, you have successfully reassembled your Subaru key fob and can now use it as usual.
Frequently Asked Questions
How often should I change the battery in my Subaru key fob?
It is recommended to change the battery in your Subaru key fob every 1-2 years, depending on usage.
What type of battery does a Subaru key fob use?
Subaru key fobs typically use CR2032 or CR2025 lithium coin cell batteries.
How do I know if the battery in my Subaru key fob needs to be replaced?
You may notice decreased range or responsiveness when using the key fob, indicating that the battery may need to be replaced.
Can I change the battery in my Subaru key fob myself?
Yes, changing the battery in a Subaru key fob is a simple process that can be done at home with a small screwdriver and a new battery.
Where can I purchase a replacement battery for my Subaru key fob?
Replacement batteries for Subaru key fobs can be found at most hardware stores, automotive supply stores, or online retailers.
Are there any special instructions for changing the battery in a Subaru key fob?
It’s important to ensure that the new battery is properly installed with the correct orientation to avoid damaging the key fob.
What should I do if changing the battery does not solve the issues with my Subaru key fob?
If replacing the battery does not resolve the issues, it may be necessary to have the key fob inspected by a Subaru dealer or automotive locksmith.
Add comment