adminLearn how to access, remove, replace, test, and assemble your key fob battery with our step-by-step guide. Keep your key fob working smoothly!Do you find yourself struggling with a dying battery in your 2019 Jeep Cherokee key fob? Not to worry, because in this blog post, we will walk you through the simple steps to change the battery in your key fob. Whether your key fob is completely dead or you just want to be proactive and replace the battery before it dies, we’ve got you covered. From accessing the key fob to testing the new battery, we will provide you with clear and easy-to-follow instructions. By the end of this post, you’ll feel confident and empowered to tackle this task on your own. So, grab your key fob and let’s get started!
Accessing the key fob
Accessing the key fob
Accessing the key fob
Before you can change the battery in your 2019 Jeep Cherokee key fob, you’ll need to access the inside of the fob. This can be done by locating the small slot on the side of the fob and using a flathead screwdriver to gently pry open the cover. Be careful not to use too much force, as you don’t want to damage the fob in the process.
Once the cover is open, you’ll see the old battery nestled inside. It’s important to be cautious when handling the battery, as it may be corroded or leaky. Use a pair of gloves and carefully remove the old battery from its compartment, taking care not to touch any of the other components inside the fob.
After the old battery has been removed, take a moment to inspect the inside of the fob for any signs of damage or corrosion. This is also a good time to clean any debris or residue from inside the fob to ensure that the new battery will make a proper connection.
Removing the key fob cover
When it comes to changing the battery in your 2019 Jeep Cherokee key fob, the first step is to remove the key fob cover. To begin, take a small flathead screwdriver and insert it into the seam of the key fob. Gently pry the cover open, being careful not to damage the plastic casing. Once the cover is loosened, carefully lift it off and set it aside.
Next, you will need to remove the old battery from the key fob. This can usually be done by gently inserting the screwdriver under the battery and popping it out of place. Take note of the orientation of the old battery so that you can properly install the new one.
After the cover has been removed and the old battery has been taken out, you are ready to replace the battery. This process involves inserting the new battery into the key fob and making sure it is securely in place. Once the new battery is installed, you can proceed with testing the key fob and assembling it back together.
Replacing the old battery
When it comes time to replacing the old battery in your 2019 Jeep Cherokee key fob, it’s important to follow the correct steps to ensure the process goes smoothly. Start by locating the small slot on the key fob cover. Using a flathead screwdriver or a coin, carefully pry open the cover to reveal the battery inside.
Next, use a small screwdriver to gently pry out the old battery from its housing. Take note of the orientation of the battery before removing it, as you will need to insert the new battery in the same way. Dispose of the old battery properly and avoid touching the contacts with your bare hands to prevent any potential damage.
Once the old battery has been removed, carefully place the new battery into the housing, making sure it is facing the correct direction. Press down until the new battery is secure in place. With the new battery installed, snap the key fob cover back into place, making sure it is fully secured. Test the key fob to ensure the new battery is functioning properly.
Testing the new battery
Once you have replaced the old battery in your 2019 Jeep Cherokee key fob, it is important to test the new battery to ensure that it is functioning properly. Testing the new battery will give you peace of mind and ensure that your key fob continues to work effectively.
One way to test the new battery is to press the buttons on the key fob and see if they function as they should. If the buttons respond as expected and the key fob unlocks or locks the car doors, then the new battery is likely working well.
If you want to be more thorough in your testing, you can also use a battery tester to determine the exact charge of the new battery. This will give you a more precise understanding of the battery’s health and ensure that it is in optimal condition for use in your key fob.
Assembling the key fob
Assembling the key fob
Assembling the Key Fob
After testing the new battery and making sure it is working properly, it’s time to assemble the key fob. First, carefully place the new battery back into the slot, making sure it is inserted correctly and securely. Use your fingers to press down on the battery to ensure it is in place.
Next, take the key fob cover and line it up with the grooves on the main body of the key fob. Once it is properly aligned, press down firmly on the cover until it snaps back into place. You should hear a clicking sound, indicating that the cover is securely attached.
Finally, give the key fob a quick once-over to make sure everything is properly assembled. Check for any loose parts or gaps in the casing. Once you are confident that everything is in place, your key fob is ready to go.
Frequently Asked Questions
What tools do I need to change the battery in a 2019 Jeep Cherokee key fob?
You will need a small flathead screwdriver and a replacement CR2032 battery.
Where can I purchase a replacement battery for my 2019 Jeep Cherokee key fob?
You can purchase a CR2032 battery at most hardware stores, electronic shops, or online retailers.
How do I open the 2019 Jeep Cherokee key fob to access the battery compartment?
Use the small flathead screwdriver to gently pry open the key fob along the seam. Be careful not to damage the plastic casing.
What is the correct orientation for installing the new battery in the key fob?
The positive side of the CR2032 battery should be facing up, with the negative side touching the metal contacts inside the key fob.
After replacing the battery, do I need to reprogram the key fob for my 2019 Jeep Cherokee?
No, simply replacing the battery should not require reprogramming. The key fob should work as usual.
How long does the battery in a 2019 Jeep Cherokee key fob typically last?
The CR2032 battery in the key fob should last for about 1-2 years with normal use.
Are there any special precautions I should take when changing the battery in my 2019 Jeep Cherokee key fob?
It’s important to handle the small battery carefully and avoid touching the metal contacts with your fingers to prevent damage.
Add comment