Change Battery Key Fob
how to change battery in 2020 kia telluride key fob

how to change battery in 2020 kia telluride key fob

Learn how to easily locate, remove, replace, reassemble, and test your key fob battery with our step-by-step guide. Keep your key fob working efficiently!Are you experiencing issues with your 2020 Kia Telluride key fob? It could be that the battery needs to be replaced. But before you rush to the dealership and spend money on a simple fix, why not try changing the battery yourself? In this blog post, we will guide you through the process of changing the battery in your 2020 Kia Telluride key fob. From locating the key fob battery to testing the new one, we’ve got you covered. By following these simple steps, you can save time and money by replacing the battery in your key fob on your own. So, if you’re ready to take matters into your own hands and become a DIY pro, keep reading to learn how to change the battery in your 2020 Kia Telluride key fob.

Locating the Key Fob Battery

How to Change Battery in 2020 Kia Telluride Key Fob

Locating the Key Fob Battery

When it’s time to change the battery in your 2020 Kia Telluride key fob, the first step is to locate the key fob battery. The key fob houses the battery, which is essential for your key fob to function properly. You need to know where the battery is located in order to replace it with a new one.

First, you’ll need to remove the key fob cover, which is typically located on the back of the key fob. Once the cover is off, you’ll be able to see the battery compartment. In some models, the battery may be easily accessible, while in others, you may need to unscrew a small panel to access the battery. Refer to your owner’s manual for specific instructions on locating the key fob battery in your 2020 Kia Telluride.

Once you’ve located the battery, take note of the type and size of the battery so that you can purchase the correct replacement. It’s important to use the right type of battery to ensure that your key fob functions properly.

Removing the Key Fob Cover

When it comes to maintaining your 2020 Kia Telluride key fob, it’s important to know how to properly remove the cover in order to access the battery. The first step is to identify the small notch located at the bottom of the key fob. Use a small flathead screwdriver or a coin to gently pry open the cover from the notch. Be careful not to use too much force, as this could potentially damage the cover or the internal components of the fob.

Once the cover has been removed, carefully set it aside in a safe place to avoid misplacing it. Take note of the orientation of the cover, as it will need to be placed back on the fob in the correct position. This will ensure that the cover fits properly and protects the internal components of the key fob.

After removing the cover, you will have easy access to the battery compartment. From here, you can proceed with replacing the old battery with a new one, ensuring that the positive and negative terminals are aligned correctly. Once the new battery is in place, you can then reassemble the key fob and test the functionality of the new battery.

Replacing the Key Fob Battery

Are you having trouble with your 2020 Kia Telluride key fob not working? It could be due to a weak or dead battery. Replacing the key fob battery is a simple process that you can do yourself, saving time and money compared to going to a dealership. Here’s a step-by-step guide on how to replace the key fob battery in your 2020 Kia Telluride.

First, locate the key fob battery. On the back of the key fob, you’ll find a small release button. Press this button to release the manual key. Use the manual key to gently pry open the key fob cover. Once open, look for the battery compartment. Depending on the model of your key fob, the battery may be a CR2032 or a CR2032. Consult your owner’s manual if you are unsure.

Next, carefully remove the old battery from the compartment. Use a small flat-head screwdriver or your fingernail to gently pry out the battery. Be sure to note the orientation of the old battery, as you will need to insert the new battery in the same position. Once the old battery is removed, insert the new battery into the compartment. Ensure that the positive side of the battery is facing up.

Reassembling the Key Fob

Reassembling the Key Fob

Now that you have successfully replaced the old battery in your 2020 Kia Telluride key fob, it’s time to reassemble the key fob. This step is crucial to ensure that your key fob functions properly.

To begin reassembling the key fob, carefully place the battery back into its compartment. Make sure it is securely in place and properly aligned.

Next, carefully place the key fob cover back onto the battery compartment. Gently press down on the cover to snap it into place. Ensure that all sides are securely fastened to prevent the battery and internal components from coming loose.

Testing the New Key Fob Battery

After replacing the battery in your 2020 Kia Telluride key fob, the next step is to test the new battery to ensure that it is functioning properly. This is an important step to take before reassembling the key fob and using it again.

One way to test the new key fob battery is by pressing the buttons on the fob to see if it unlocks the car doors and activates the panic alarm. If the buttons are not working, it could be a sign that the new battery is not installed correctly or that it is defective.

Another method to test the new key fob battery is by using a key fob tester or a multimeter. These tools can measure the voltage of the battery to confirm that it is at the correct power level for the key fob to function properly. If the voltage is lower than the recommended level, it may be necessary to replace the battery again with a new one.

Frequently Asked Questions

What type of battery does the 2020 Kia Telluride key fob use?

The 2020 Kia Telluride key fob uses a CR2032 3V coin cell battery.

How do I open the 2020 Kia Telluride key fob to change the battery?

To open the key fob, use the built-in key to pry it open at the slot on the side of the fob.

Where can I buy a replacement battery for the 2020 Kia Telluride key fob?

You can purchase a replacement CR2032 battery at most hardware stores, electronics stores, or online retailers.

How often should I change the battery in the 2020 Kia Telluride key fob?

The battery in the key fob should typically be replaced every 1-2 years, depending on usage.

Are there any special instructions for replacing the battery in the 2020 Kia Telluride key fob?

Make sure to carefully remove the old battery and replace it with the new one, ensuring the correct polarity.

What should I do if changing the battery doesn’t resolve issues with the key fob?

If changing the battery doesn’t work, you may need to have the key fob reprogrammed by a Kia dealership or qualified automotive locksmith.

Can I still manually unlock and start my 2020 Kia Telluride if the key fob battery dies?

Yes, you can use the physical key blade that is housed within the key fob to unlock and start the vehicle in case of a dead battery.

Add comment

As changebatterykeyfob.com, we provide detailed information about battery replacement for all vehicles. Please comment with your requests and criticisms.

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept